Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterTrusted Gate Parts & Welding for Arcadia Homeowners
When a gate starts sagging, dragging, or refusing to latch, the problem is almost always a worn part or a failing weld, not the whole gate. If you’re wondering how much Gate Parts & Welding costs, repair in Arcadia typically runs $150 to $600 depending on whether you need a hinge swapped, a post reset, or a crack welded on site. Hal Gatewood has been doing this work since 2001, and he’ll tell you straight: most gates don’t need replacing. They need the right part and a welder who knows where the stress actually lands. Call (626) 628-9548 and you’ll get a live person, not a voicemail.
We’re the shop with the name on the door and the address published where anyone can find it. Hal Gatewood’s name is on every invoice. When you call about Gate Parts & Welding - Arcadia, you’ll talk to someone who has welded in San Gabriel Valley driveways for over two decades, not a call center three states away. If your gate is down, we come out, diagnose it in your driveway, and fix it there. No hauling it off. No swapping parts that don’t need swapping.
Key Takeaways
- Most Arcadia gate failures are parts and welds, not the whole gate. Repair-first saves hundreds over replacement.
- We weld on site in your driveway. The gate stays where it belongs.
- Every job carries the 90-Day Done Right Promise in writing. If it’s not done right, we come back and make it right.
- Free estimates, no trip charge inside the county, and $40 off any repair over $200.
- Call (626) 628-9548. A live person answers, 24/7.
What Our Gate Parts & Welding Service Includes
Gate hardware wears out in predictable ways. Hinges wallow out, posts rot or shift, rails crack at the weld joints, rollers flatten, latches stop catching. Each one has a fix, and most of them don’t require a new gate. Here’s exactly what we handle under gate parts and welding in Arcadia.
Hinge Replacement
A gate that drags on the latch side almost always has a worn hinge, not a bent frame. When the hinge pin wears down or the barrel elongates, the whole gate leans and every other part takes extra stress. We cut off the old hinge, weld a new one in place, and align the gate so it swings true. If the hinge post itself is solid, this is a same-day fix in most Arcadia driveways.
Post Replacement
The hinge post carries the entire weight of the gate, and when it rots at the base or shifts in the ground, the gate sags no matter how new the hinges are. We remove the old post, set a new one in concrete, and re-weld the hinges at the correct height and angle. Fix the panel without the post and you’ll fix it twice. We’ve seen it too many times around Gate Parts & Welding in San Gabriel, Arcadia, and the surrounding foothill neighborhoods where soil shifts with the seasons.
Rail Repair
On steel tube gates, the horizontal rails are where cracks start, usually right at the weld where the rail meets the picket or the frame corner. A cracked rail lets the gate twist and eventually break completely. We grind out the crack, weld it solid, and often add a gusset so the same stress point doesn’t fail again. The gate stays in your driveway the whole time, and the repair is stronger than the original joint.
Custom Welding
Not every gate problem matches a catalog part. When a gate has an unusual hinge spacing, a broken ornamental scroll, or a frame that cracked in a weird spot, we fabricate the fix on site. Hal carries a mobile welder set up for steel, aluminum, and wrought iron, and he’s been fabricating gate repairs since 2001. If the part doesn’t exist, we make it. That’s the advantage of a shop that welds instead of just swapping parts.
Gate Rollers
Cantilever and sliding gates ride on rollers, and when a roller bearing seizes or the wheel flattens, the gate fights you every inch. You’ll hear grinding, or the gate will bind halfway and stall the motor. We replace the roller, clean the track, and adjust the height so the gate moves with one hand again. In Arcadia’s dry, dusty conditions, roller bearings collect grit faster than homeowners expect, so we check the whole roller assembly, not just the one that failed.
Latch & Lock
A latch that doesn’t catch leaves your gate banging in the wind and your yard open to whatever wanders through. Sometimes it’s a misaligned striker plate, sometimes a worn spring, sometimes the lock itself is done. We adjust, repair, or replace the latch mechanism and test it a dozen times before we leave. A gate that closes on its own and actually stays latched is the bare minimum of what you’re paying for.
Whatever the part, the approach is the same. We look at the whole gate, find the actual failure point, and fix it there. Not the symptom. The cause.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service for Gate Parts & Welding
We work on gates from every major manufacturer, and we stock parts for the brands we see most often in the San Gabriel Valley. When your gate hardware is brand-specific, generic parts don’t line up right, and they fail early. That’s why we keep OEM parts on hand for the brands Arcadia homeowners actually have.
FAAC: We’ve serviced FAAC gate operators and their associated hardware for years. FAAC makes solid equipment, but their hinge and bracket geometry is specific. If you have a FAAC gate that’s sagging or binding, we match the OEM parts and weld them in to factory alignment.
BFT: BFT systems are common on Arcadia’s newer estates and commercial properties. We carry BFT-compatible hardware and we know their rail and roller setups well enough to diagnose the problem in one visit, not three.
Linear: Linear operators are workhorses, and their gates live or die by the roller and hinge hardware around them. We service Linear gates throughout Arcadia and keep their common replacement parts in the truck, so most repairs don’t need a second trip.
Viking: Viking makes heavy-duty residential and light commercial gates, and we’ve welded our share of Viking frames that cracked at the corners after years of service. The repair is straightforward when you know where Viking gates carry their load.
Whether your gate is Viking, Linear, BFT, FAAC, or any other make, the part is only half the fix. The weld has to be right, and the alignment has to be true. That’s the part we’ve been doing since 2001.
Signs You Need Gate Parts & Welding Right Now
- The gate drags or scrapes the ground when it opens. This means a hinge is worn or a post is leaning. Every open cycle grinds the bottom edge and puts more stress on the hinges and the motor. The longer it drags, the more parts you’ll need to replace.
- You hear grinding, squealing, or a rhythmic thunk when the gate moves. That’s a roller bearing fighting its track or a hinge pin that’s wallowed out. The noise is metal on metal, and it’s chewing itself up. It won’t get quieter on its own.
- The gate is visibly tilted, with a bigger gap at the top than the bottom, or vice versa. A gate sags in the hinge post, not in the middle, and that’s where we start. A tilted gate means the post has shifted or the hinge has failed. Waiting means the frame warps and the repair gets bigger.
- The latch won’t catch, or you have to lift the gate to get it to close. This is a sign the gate has already moved out of alignment. A gate that won’t latch is a security problem, plain and simple. It’s also a warning that the hinges or post are failing and the gate will only get worse.
- You see visible cracks in the metal, especially at weld joints or corners. Cracks in a steel gate frame spread. Every open-close cycle works the crack wider, and eventually the rail or frame separates completely. A weld repair done early is a hundred-dollar fix. A broken gate is a much bigger one.
If you’re seeing any of these, call us at (626) 628-9548. We’ll come look, tell you honestly what’s wrong, and give you a written price before any work starts. No pressure, no upsell.
Our Gate Parts & Welding Process - Step by Step
We don’t do mystery service. Here’s exactly what happens when you call Gatewood Fence & Gate for gate parts or welding in Arcadia.
- 1
You call and talk to a real person. Not a phone tree, not a chatbot. Hal or one of his crew answers, 24 hours a day, 7 days a week. You describe the problem, we ask a few questions, and we schedule a time that works. We show up in the window we promised.
- 2
We inspect the gate on site. We look at the hinges, the post, the rails, the rollers, and the latch. We check how the gate hangs, how it moves, and where the wear is. We don’t guess. We find the actual failure point before we touch a tool.
- 3
You get a written price, up front. Before any work starts, you’ll know exactly what the repair costs. The price we quote is the price you pay. No surprises at the door. If you have a written estimate from another company, bring it. We’ll give you a free second opinion.
- 4
We do the work, usually on the spot. Most hinge replacements, weld repairs, roller swaps, and latch fixes are done the same day, right in your driveway. The gate doesn’t leave your property. When we’re done, we test the gate multiple times, full open to full close, and show you the work.
- 5
You get the 90-Day Done Right Promise in writing. If anything we fixed isn’t right within 90 days, call us. One call brings Hal back, no runaround, no fine print. That’s the promise, stamped on every job.
How Much Does Gate Parts & Welding Cost in Arcadia?
Here’s the straight answer. A typical hinge replacement on a single residential gate in Arcadia runs $150 to $350. Post replacement runs $400 to $900 depending on the post size, whether it’s set in concrete, and how much of the surrounding work needs to be redone. Rail repair and crack welding usually falls between $150 and $400 depending on the length of the crack and how much reinforcement the frame needs. Gate roller replacement runs $120 to $300. Latch and lock repair is the most affordable fix at $90 to $250 in most cases.
What affects the price: the gate’s weight and size, how accessible the post is (some Arcadia properties have gates set into block walls, which takes more time), whether the metal is steel or aluminum, and how far the damage has spread. Waiting too long always costs more. A worn hinge that’s ignored for six months also ruins the latch side and bends the frame.
How to avoid overpaying: get a written estimate, make sure the welder is doing the work on site, and ask whether they’re replacing parts that actually need replacing. We’ll show you the worn part before we swap it. Our free estimate includes the diagnosis, the written price, and our honest recommendation. If the gate doesn’t need the work, we’ll tell you that too. And remember: $40 off any repair over $200, no trip charge inside the county, and a permanent 10% discount for seniors and veterans. Call (626) 628-9548 for your free estimate.
Gate Parts & Welding Near Arcadia - Our Service Area
We’re based right here and we serve Arcadia and the surrounding communities every week. You’ll see our truck in Pasadena, Sierra Madre, El Monte, San Gabriel, San Marino, Rosemead, Alhambra, Altadena, Azusa, Monterey Park, and West Covina. Same-day service is available throughout the area, and because we’re local, response times are measured in hours, not days. If you’re in San Marino or South Pasadena and need Gate Parts & Welding in Pasadena, we’re close by. Our home page has more about how we work.
Serving Arcadia, CA - Our Local Coverage Area
We’re based in the Arcadia area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
Frequently Asked Questions - Gate Parts & Welding in Arcadia
Gate parts and welding is the repair of the structural and mechanical components that keep a gate swinging or sliding correctly. That includes hinges, posts, rails, rollers, latches, locks, and the metal fabrication needed to repair cracks or broken joints. We do this work while the gate stays installed in your driveway, rather than hauling it off to a shop.
Most hinge replacements, roller swaps, and weld repairs are done the same day, typically in two to four hours depending on the damage. Post replacement takes longer because the concrete needs time to set before the gate goes back on. We’ll give you a clear timeline when we inspect the gate, and we stick to it.
Most repairs run between $90 and $900 depending on the part and the extent of the welding. Hinge replacement is usually $150 to $350, post replacement $400 to $900, rail repair $150 to $400, rollers $120 to $300, and latch work $90 to $250. We quote the exact price in writing before any work begins. Call (626) 628-9548 for a free estimate.
Yes. We stock parts for FAAC, BFT, Linear, and Viking systems and we’ve serviced hundreds of each brand across the San Gabriel Valley, including our Gate Parts & Welding in Sierra Madre. Their hardware is specific, and generic parts don’t line up right. We use OEM parts matched to your gate’s manufacturer and weld them to factory alignment.
Yes. We answer the phone 24 hours a day, 7 days a week, and we can usually get to an emergency gate the same day. If your gate won’t close and your property is unsecured, call (626) 628-9548 and a live person will answer, day or night.
Every job carries our 90-Day Done Right Promise in writing. If any part of the repair isn’t done right within 90 days, one call brings Hal back. No runaround, no fine print. That’s the promise, and it’s on every invoice.
Clear a path to the gate on both sides so we can access the hinges, post, and track. If you have dogs, put them inside so we can work safely. Have any written estimates from other companies handy if you’d like our free second opinion. We handle everything else from there. Call (626) 628-9548 with any questions.
Schedule Your Gate Parts & Welding Service in Arcadia Today
If your gate is sagging, dragging, cracked, or just not latching, don’t wait for it to get worse. Call Gatewood Fence & Gate at (626) 628-9548 for a free, no-obligation estimate. Hal Gatewood has been fixing gates in Arcadia since 2001, and his name is on every job. One call, a live person, and a written price before any work starts.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Arcadia since 2001.