Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Repair Services in Azusa, CA
If you live in Azusa and your driveway gate has started grinding, sagging, or refusing to open, you already know the feeling: you’re late, the gate is stuck, and the opener just hums. We fix that, usually the same day you call. Gatewood Fence & Gate is locally owned and owner-operated, and when you call (626) 628-9548, a live person picks up, not a voicemail tree. Hal Gatewood built this company in 2001, and the way we work hasn’t changed since: we show up, look at the gate in your driveway, quote an honest price before any work starts, and then fix what’s actually broken.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Why Azusa Homeowners Choose Gatewood Fence & Gate
Most of the calls we get from the north side of Azusa start the same way: somebody already paid another company to “fix” the gate and it failed again six weeks later. That’s not bad luck. That’s what happens when a company replaces a hinge but doesn’t touch the post that shifted, or swaps a motor without checking why the old one burned out. We repair first. Hal has been welding on site since 2001, and his crew fixes the gate in your driveway rather than hauling it off and billing you for a replacement that wasn’t necessary. Every job carries the 90-Day Done Right Promise in writing. If it’s not right, one call brings him back. No runaround, no fine print.
We work regularly in the neighborhoods along Sierra Madre Avenue and up near the Canyon View and Mountain Cove areas, where wind-driven gate failures are constant. Homeowners there see us more than once, because a gate that gets racked by canyon gusts twice a year needs a mechanic who remembers what was done last time.
Gate Repair Services We Offer in Azusa
Gate Repair
A sagging gate is almost never a hinge problem. It’s a post problem. A gate sags in the hinge post, not in the middle, and that’s where we start. We fix the post, re-weld the hinge plate, and square the frame so the gate closes true. Learn more about our Gate Repair in Azusa.
Gate Installation
When a gate is genuinely beyond repair, we install new steel and iron gates, set posts to the right depth for Azusa’s soil, and hang the gate to handle canyon wind. We measure on site, quote a written price, and schedule the work for a day, not a “sometime.” Learn more about our Gate Installation in Azusa.
Gate Motor & Opener
Azusa summers over 100°F kill motor capacitors fast. If your opener works in the morning but fails by afternoon, that’s a classic heat-degraded capacitor, and we stock them on the truck. We service LiftMaster, FAAC, BFT, Linear, and Viking openers, among others. Learn more about our Gate Motor & Opener service in Azusa.
Gate Access Control
Apartment complexes and gated communities along the Gold Line corridor near APU and Citrus College need loop detectors, keypads, and phone entry systems that survive heat and heavy use. We service the electronics and the structure they’re mounted to, because a keypad hanging from a failing weld is still a failed gate. Learn more about our Gate Access Control in Azusa.
Gate Parts & Welding
We keep hinges, rollers, bottom guides, and motor parts for nine major brands on the truck. And when a weld fails on a 60-year-old iron gate, Hal welds it on site, right there in your driveway, so the gate doesn’t leave the property. Learn more about our Gate Parts & Welding in Azusa.
Neighborhoods We Serve in Azusa
We’re in and out of Azusa every week, from the older tract streets west of Azusa Avenue to the newer developments pressed against the canyon mouth. Typical response time across Azusa is same-day or next-morning, depending on when you call. Some of the neighborhoods we work in most often:
- Canyon View and Mountain Cove, near San Gabriel Canyon Road
- The tract-home streets between Foothill Boulevard and Sierra Madre Avenue
- Areas around North Azusa Avenue and the older 1950s-1960s subdivisions
- The APU/Citrus College Gold Line corridor, including gated multifamily properties
- Streets off East Foothill Boulevard, where many original iron gates remain
Why Azusa’s Climate & Housing Affect Gate Repair
Azusa sits at the mouth of San Gabriel Canyon, and that’s not a scenic footnote. It’s a wind funnel. Sustained gusts pour down the canyon and hit the northern neighborhoods hard, pushing laterally against gate frames, loosening anchor bolts, and racking gates out of square. We see gates in Mountain Cove that fail differently than gates in Covina or Baldwin Park, where wind isn’t nearly as aggressive. A gate that works fine in a flat valley city gets twisted here. Add summer highs over 100°F, and you have motors cooking their capacitors, nylon rollers warping, and track lubricant burning off months ahead of schedule.
Then there’s the fire cycle. After the 2009 Station Fire and the 2020 Bobcat Fire, winter rains pushed ash and sediment down from the burn scars into north Azusa neighborhoods. For slide gates near the canyon, that means tracks packed solid with debris, bent bottom guides, and motors that burned out trying to shove through the muck. If you live north of Sierra Madre Avenue and your slide gate stopped moving after a winter storm, check the track before you call. Actually, don’t check it manually with the motor still connected. Call us. We budget for that cleanout every winter after a mountain fire, and we bring the right tools to clear it safely.
Azusa’s housing stock adds its own layer. Much of the residential core was built between the 1950s and 1970s, and a lot of those homes still have their original wrought-iron driveway and side-yard gates. That’s a 50 to 70 year old weld, often rusted at the hinge plate, with a concrete pier that’s shifted over decades of canyon wind. We repair those gates rather than replacing them when the steel is still sound. It saves Azusa homeowners real money.
Pricing for Gate Repair in Azusa
Gate repair in Azusa typically runs between $180 and $400 for most hinge, post, and alignment jobs. Motor and opener work lands between $250 and $650 depending on the part and the brand. Full replacement of a badly rusted hinge and post reset is usually $300 to $700, depending on how deep the post is set and whether new steel is needed. Sliding gate track cleanouts after fire-season debris flows run $200 to $450. Every price is quoted and agreed before any work starts. No surprises at the door, ever. We also have standing offers: $40 off any repair over $200, no trip charge inside the county, free second opinion on any written estimate, and a permanent 10% discount for seniors and veterans. Our home page has the full scope of what we do.
Service Area - Cities Near Azusa
Gatewood Fence & Gate works across the San Gabriel Valley. If you’re in Covina, West Covina, Arcadia, or El Monte, we cover those cities too. The wind, heat, and gate-age issues shift a bit from city to city, and we adjust how we repair accordingly.
Serving Azusa, CA - Our Local Coverage Area
We’re based in the Azusa area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Azusa
Most Azusa calls are same-day or next-morning. A live person answers the phone 24/7, and you’ll know before you hang up when someone will be there. If your gate is stuck open and the property isn’t secure, say so and we’ll prioritize it. Call (626) 628-9548 and we’ll give you a real window, not a four-hour range.
Most sagging-gate repairs in Azusa run $180 to $400, depending on whether the hinge post needs to be straightened or reset. The real trick is fixing the post, not just the hinge, so the gate doesn’t sag again next year. Call (626) 628-9548 for an exact quote. Estimates are free.
Burn-scar debris flows from the San Gabriel Canyon pack slide-gate tracks with ash and sediment after winter rains, especially in north Azusa. The motor burns out trying to shove through the muck, or the track seizes entirely. It’s a half-day cleanout and reset job. We see it every year after major mountain fires.
We repair first, and we’re honest when a gate isn’t worth saving. Hal’s philosophy is simple: if the steel is still sound, fix the weld and the post and keep the gate. If the frame is rotted through or the damage is structural, we’ll tell you straight and quote a replacement without pressure.
We handle the full motor installation, including wiring, safety edges, photo eyes, and programming. It’s measured and quoted in writing before we order anything. Call (626) 628-9548 and we’ll set up a time to measure and give you a solid number.
Call Gatewood Fence & Gate for Gate Repair in Azusa
If your gate is broken, you don’t need a chatbot. You need a person who answers the phone and tells you when he’ll be there. That’s how we’ve worked since Hal opened the shop in 2001, and it’s how we’ll work when you call. The name is on the shop, the address is published, and the 90-Day Done Right Promise is in writing. Call (626) 628-9548 for a free estimate. A live person answers, day or night.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate. I’ve been fixing gates since 2001, and the name on the shop is my own.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Azusa Customers Say
"Safety photo eyes on our old gate had been bypassed by whoever serviced it last, which he was genuinely annoyed about on my behalf. Fitted proper sealed ones and wired them the way they should be."
- Otis Redmond"Beautiful gate and solid work. The build took about three weeks longer than the estimate because he was waiting on the ironwork, and I would rather have known that at the start than found out along the way."
- Beatrice Nwosu"Operator had died and the manufacturer no longer makes the board. Rather than sell me a whole new system he found a compatible unit and adapted the mount. Saved me a great deal of money."
- Salvador Arredondo