Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Covina
Gate repair in Covina usually comes down to one of three things: a post that has shifted, a weld that finally gave out, or an opener that has lost its mind in the heat. We handle all three, often the same day you call. Our shop coordinates all Covina work from our Los Angeles office, and we keep the trucks stocked for the iron gates and slide operators this part of the San Gabriel Valley throws at us. If your gate is sagging, binding, or refusing to open, call us at (626) 628-9548 and you will get a person, not a recording.
Why Gatewood Fence & Gate Is Covina’s Preferred Gate Repair Company
Hal Gatewood started fixing gates in 2001, and he still runs the show. That means the name on the invoice is the name of the person who stands behind the work. Covina homeowners have told us the same story for years: a big company quoted one number over the phone, sent a crew that swapped the whole opener assembly, and left before the gate ever swung straight. We do not work that way. We repair first, replace only what is actually broken, and weld on site in your driveway instead of hauling your gate to some yard. And every job carries the 90-Day Done Right Promise in writing. If it is not right, one call brings us back. No runaround, no “in most cases.”
Our Gate Repair Services in Covina
Hinge & Post Repair
This is the repair we do more than any other in Covina, and for good reason. The alluvial clay soils up toward the San Gabriel foothills shrink and crack during prolonged summer drought, and that is exactly what heaves a hinge post out of plumb. A gate sags in the post, not in the middle, so we start at the footing. We pull the post, re-set it in new concrete, and only then touch the hardware. Fix the panel without the post and you will fix it twice.
Gate Realignment
A gate that scrapes the ground or will not latch is usually out of swing, not out of luck. In Covina this happens after dry summers shift footings, or after a Santa Ana wind event slams the gate hard enough to move the hinges half an inch. We bring the gate back to square, re-set the latch and catch, and confirm the swing arc clears the block walls that frame most Covina side yards. If your automatic opener stopped behaving after the gate was knocked around, we re-align the gate before we touch the operator.
Automatic Gate Repair
We service Automatic gate operators from FAAC, BFT, Linear, and Viking, among others, and the heat in Covina is real factor. Triple-digit summer days make limit switches drift, make safety edges false-trip, and make circuit boards act up in ways coastal installers never see. Our Gate Repair team tests the full system under load, not just on the workbench. If your gate reverses for no reason on a hot afternoon or the keypad throws false faults, call before the next Santa Ana wind finds the weak spot.
Electric Gate Repair
Electric gate issues in Covina break down into two camps: power problems and logic problems. Power problems are the transformer, the battery backup, or the run of conduit from the house to the keypad. Logic problems are the control board, the loop detector, and the photo eyes. We carry replacement parts for the brands you actually have, and we test the whole circuit, not just the component that threw the error. A live person answers the phone 24/7, so when your gate will not close at 6 a.m. and you need to leave for work, you are not leaving a message.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Covina
We are certified to service nine major gate brands, and in Covina we see a lot of FAAC, BFT, and Viking slide operators on the older ranch-style homes, plus Linear and LiftMaster on newer installs. We stock common parts locally, so a failed limit switch or a worn rack and pinion does not mean waiting a week for a part to ship. If you have a Ghost Controls opener on a pedestrian gate or an old Mighty Mule on a farm-style gate, we handle those too. The goal is the same: fix what broke, keep your existing hardware when it still has life, and never upsell you into equipment you do not need.
Common Gate Repair Problems We See in Covina Homes
- Drought-heaved hinge posts. The clay soils near the foothills shrink in summer drought, and a post that was level in May can be off by an inch in September. A gate that will not latch is often a footing problem first, a hardware problem second.
- UV-baked wrought iron weld fatigue. Covina’s original 1950s and 60s wrought iron gates have zero coastal moisture to cool them. They bake all summer, the metal expands and contracts, and 50 to 70 year old welds crack. We weld them on site, not in a shop bay where your gate sits for two weeks.
- Santa Ana wind damage. When the wind funnels through the San Gabriel Valley corridor, an unlatched gate slams hard. We see sheared hinge pins and fractured rack and pinion drives on slide gates after a single windy afternoon. A good latch and a properly set post are your first line of defense.
- Phantom opener reversals in the heat. When Covina tops 100°F, metal gate frames expand and operator hardware stresses in cycles. Safety edges that worked fine in spring start false-tripping in July. We test the full system at temperature, not just in the shade of your carport.
Pricing for Gate Repair in Covina, CA
A hinge and post re-set in Covina typically runs $280 to $480 depending on post size and whether we are pouring new concrete for the footing or re-using the existing anchor. Gate realignment runs $150 to $260 on most standard side-yard gates, more if we are correcting a gate that has been pushed hard enough to shift the hinge barrels. Automatic gate operator repair averages $190 to $350 for board, limit, and safety-edge work. Weld and rust repair runs $120 to $300 for most repairs on 50 to 70 year old wrought iron. Those are real numbers, not teaser quotes. We give an upfront price before any work starts, and the price we quote is the price you pay. $40 off any repair over $200, no trip charge inside the county, and a free second opinion on any written estimate you have from another company. Seniors and veterans get a 10% discount, always.
We Also Serve Cities Near Covina
Our crew covers Gate Repair in Covina plus the surrounding San Gabriel Valley communities. If you are in Azusa, West Covina, Arcadia, or El Monte and dealing with a sagging gate or a dead opener, give us a call. We schedule Covina-area visits in the same window we promise, and we show up when we say we will.
Serving Covina, CA - Our Local Coverage Area
We’re based in the Covina area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Covina
The alluvial clay soils near the South Hills and foothill subdivisions shrink when the ground dries out, and that contraction pulls the concrete footing just enough to tip the post. Re-setting the post in new concrete with a deeper footing and proper drainage fixes the movement at the source, not just the symptom. We do this repair all over North Covina, from Badillo Street up toward the hills. Call (626) 628-9548 and we will come look at the footing and tell you straight whether the post needs re-setting or just re-plumbing.
Yes. When the wind slams an unlatched slide gate, the rack and pinion drive takes the impact, and that is how teeth shear and the gate starts binding in one spot. We straighten the rack, replace the damaged pinion if it is worn, and re-set the gate’s travel limits so it rolls clean. Most of these repairs happen in fall, when the winds are coming through. Call and we will schedule you before the next big wind event finds the weak spot.
The usual culprits are heat-expanded gate frames tripping the safety edge, or the operator’s internal force settings drifting in triple-digit weather. The fix is usually re-setting the force limits and re-aligning the safety edge with the gate at full temperature. That is why we test in the afternoon heat, not just in the cool of the morning. If the board itself is failing from repeated heat cycles, we will show you the diagnostic reading and give you a repair quote before we touch it.
We start with the hinge post, because that is where a 60 or 70 year old gate sags from. We pull the post footing if the clay has heaved, re-set it square and level, then weld-repair any cracked joints in the gate frame. The wrought iron itself is usually solid, which is why we repair rather than replace. A replacement gate will not match the original scrollwork your neighbors have, and it will not fit the existing block wall openings the same way. Fixing what you have keeps the look and keeps the cost sane.
Most older Covina lots have standard rectangular layouts, but shared driveways and tight side-yard gates are common in the tract-home neighborhoods. We handle repairs where a swing gate does not clear the wall, which is part of why we carry slide-operator parts for FAAC, BFT, and Viking systems. On tight sites we re-align what is there, reinforce the post, and make sure your pedestrian gate keeps working while the driveway gate is being repaired. Call us and we will tell you what is possible on your specific driveway.
If your gate is sagging, binding, or refusing to close in Covina, call Gatewood Fence & Gate at (626) 628-9548 for a free estimate. A real person answers, 24 hours a day, seven days a week.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Covina and the San Gabriel Valley since 2001.