Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Repair Services in San Gabriel, CA
When a driveway gate in San Gabriel stops mid-swing, refuses to open, or starts grinding like it’s chewing gravel, you need someone who knows the difference between a quick adjustment and a repair that will fail again in six months. Gatewood Fence & Gate answers the phone with a live person every time you call, 24 hours a day. We work on gates throughout San Gabriel, from the ranch homes north of Las Tunas Drive to the newer properties near the San Gabriel Country Club. Call (626) 628-9548 and you’ll reach a real person who can talk through what’s happening with your gate right then.
Hal Gatewood has been fixing gates since 2001, and he still takes the calls himself. The shop is local, the name is on the door, and when he says he’ll be there in a certain window, he means it. We don’t farm work out, we don’t route you through a call center, and we don’t leave you standing in your driveway wondering if anyone is coming. Most gate repairs in San Gabriel are done the same day we see them. The ones that need a part we have to order, we’ll tell you upfront and give you a straight answer on the timeline.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Why San Gabriel Homeowners Choose Gatewood Fence & Gate
We’re a local, owner-operated shop, not a franchise or a marketing company that subs out the actual work. Hal Gatewood’s name is on the business, the license number is published for anyone to look up, and he’s been at this since 2001. When you call, you get him or one of his crew, not a “scheduler” reading from a script. That matters when your gate is hanging on one hinge and your car is trapped in the driveway.
We’ve repaired gates all over San Gabriel, from the tree-lined streets near Smith Park to the hillside lots up by the San Gabriel Country Club and the neighborhoods along Valley Boulevard. Homeowners keep calling us back because we fix the actual problem. If a hinge post is leaning, we address the post. If the circuit board is fried from heat, we replace the board and tell you why it failed. And every job, big or small, carries our 90-Day Done Right Promise in writing. If it’s not done right, one call brings Hal back. No runaround, no arguing about what’s covered.
We also don’t play the phone-quote game. The price we quote is the price you pay, agreed before any work starts. You’ll never see an inflated invoice at the door from us.
Key Takeaways
- Live person answers 24/7, not a voicemail or a robocall tree.
- Owner-operated since 2001 with a published address and license number.
- 90-Day Done Right Promise on every job, in writing.
- On-site welding means your gate stays in your San Gabriel driveway.
- Upfront pricing agreed before any work begins. Free estimates. No trip charge inside the county. $40 off any repair over $200. Permanent 10% discount for seniors and veterans.
- We service nine major gate brands, including LiftMaster, FAAC, Viking, and Mighty Mule.
Gate Repair Services We Offer in San Gabriel
Gate Repair
A sagging gate, a bent hinge, a roller that’s chewed through its track: we fix it in place, welding on site so you’re not hauling a 400-pound gate off to some shop. We see a lot of welded steel and ornamental iron gates in San Gabriel that are heavy and built to last, but the hinge posts weren’t always set deep enough for that weight. We address the root cause, not just the symptom. Fix the panel without the post and you’ll fix it twice.
Learn more about our Gate Repair in San Gabriel.
Gate Installation
Whether you’re installing a gate on a 1950s ranch home that never had one, or replacing a rusted-out swing gate near San Marino, we measure, fabricate, and install the whole thing. We’ll talk through swing versus slide, weight, wind load, and what your post footings actually need to be. This is measured, ordered, and scheduled work, not a rush job. You’ll get a free measure and a written price before anything is built.
Learn more about our Gate Installation in San Gabriel.
Gate Motor & Opener
San Gabriel’s inland heat is rough on gate operators. Circuit boards bake, wiring insulation gets brittle, and motors overheat in July. We service and replace openers from LiftMaster, FAAC, Mighty Mule, and BFT. If your gate opens fine but won’t close, or reverses for no reason, or the remote only works from three feet away, we’ll find the cause and fix it right.
Learn more about our Gate Motor & Opener in San Gabriel.
Gate Access Control
Keypads, intercoms, telephone entry, loop detectors, vehicle sensors: if your gate needs to know who’s allowed through, that’s access control. We handle residential systems and the heavier commercial setups along Valley Boulevard. Power runs, safety edges, photoelectric eyes, and backup battery systems are all part of the job.
Call (626) 628-9548 if your keypad is dead, your buzzer sounds like a dying cricket, or your gate opens for cars leaving but not cars arriving.
Gate Parts & Welding
Sometimes the smart fix is a new hinge, a reinforced post, or a welded patch, not a whole new gate. Hal welds on site, in your driveway, so your gate never leaves your property. We’ll fabricate scrollwork patches for decorative gates, box in a rusted bottom rail, and match as closely as the original as possible. If you’re not sure whether it’s repairable or needs replacement, call for a free second opinion on any written estimate you’ve already received.
Neighborhoods We Serve in San Gabriel
We work across the whole city, and we know the streets well enough to give you a straight answer on when we’ll pull up. Some of the neighborhoods we serve most often:
- North San Gabriel / San Gabriel Country Club area
- Smith Park neighborhood
- Las Tunas Drive corridor
- Valley Boulevard commercial district
- Mission District near the San Gabriel Mission
Typical response for repair calls in San Gabriel is same-day in most cases, depending on the time of day you call and what’s actually wrong. We’ll tell you honestly when we can be there.
Why San Gabriel’s Climate & Housing Affect Gate Repair
San Gabriel sits inland in the San Gabriel Valley, which means real heat. Summer days over 100°F aren’t unusual, and they’re harder on gate motors than the coastal marine layer that keeps Santa Monica cool. We regularly pull open gate operator housings in San Gabriel and find capacitors that have swollen and failed from heat cycling, or plastic gears that have softened and stripped. The UV load out here also degrades wiring insulation on exposed conduit and sensors faster than it does nearer the coast, which leads to intermittent faults that drive people crazy: the gate works at 7 a.m., then won’t respond at 3 p.m.
The housing stock adds another layer. Most of San Gabriel’s residential core was built between the 1940s and 1970s as ranch homes and bungalows that were never designed for driveway gates. Nearly every gate in town is a retrofit. That means we see improvised post anchors set in shallow footings, non-standard pillar widths, and household electrical circuits that were never sized for a gate operator’s load. When we install or repair in San Gabriel, we check the post depth, the anchor bolts, and the amperage draw, because those are the three places a retrofit gate usually fails first.
Santa Ana wind events also matter. A 60-mile-per-hour gust on a double swing gate can put enormous stress on hinges, and we’ve seen wind knock magnetic and infrared loop sensors out of calibration along Valley Boulevard and the residential streets off Del Mar Avenue.
Pricing for Gate Repair in San Gabriel
Straight numbers, no games. The price is quoted and agreed before any work starts.
- Basic hinge lubing and tightening: $75-$130
- Hinge replacement (single, included parts): $140-$260
- Track realignment or roller replacement: $120-$240
- Circuit board replacement (part and labor): $220-$480 depending on brand
- Gate operator/motor replacement: $450-$950 installed
- Weld repair on wrought iron (per patch, depending on size): $120-$400
These are honest ranges for San Gabriel. Final price depends on what we find when we look, and you’ll know that number before we pick up a tool. No trip charge inside the county, $40 off any repair over $200, and a permanent 10% discount for seniors and veterans. If you’ve got a written estimate from someone else, bring it in or send a photo. We’ll give you a free second opinion.
Service Area - Cities Near San Gabriel
We work throughout the San Gabriel Valley. If you’re in a neighboring city, you can find information on our pages for San Marino, Alhambra, Rosemead, and Arcadia.
Common Local Scenarios We See in San Gabriel
The ornate iron gate that’s sagging on the hinge side. San Gabriel has one of the highest concentrations of Chinese-American homeowners in the continental US, and that community’s emphasis on property security and curb presence drove a major wave of ornate, often custom-fabricated decorative iron gate installations through the 1990s and 2000s. Those gates are frequently heavier and more elaborate than typical Southern California tract installs, with dual-swing designs, scrollwork, and sometimes feng shui-informed proportions. Now they’re hitting their first major service cycle, and a sag on a heavy ornamental gate almost always comes from the hinge post leaning or the post footing shifting. We fix the post, not just the panel.
The commercial rolling gate on Valley Boulevard. The Valley Boulevard corridor is lined with Asian shopping plazas, restaurants, and import businesses that run high-cycle rolling and sliding gate systems. Heavy delivery-truck traffic, late-night restaurant closing hours, and owners who often communicate primarily in Mandarin or Cantonese make this strip a very different repair environment than anything in Alhambra or Rosemead. These gates open and close dozens of times a day, and when they fail, it’s usually the rollers, the guide tracks, or the chain drive. We work with building owners and managers directly, and we explain the repair in plain terms before any work starts.
The retrofit gate with the dead motor. As we mentioned, most residential gates in San Gabriel are retrofits on 1940s-to-1970s lots. That means homeowner-installed or handyman-installed openers wired into a circuit that also runs the porch light and the sprinkler timer. When that motor dies, we check the breaker, the transformer, and the amp draw before we blame the motor. Replacing the motor without fixing the power supply means you’ll be calling us again in a year.
Serving San Gabriel, CA - Our Local Coverage Area
We’re based in the San Gabriel area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in San Gabriel
Most residential gate repairs in San Gabriel run between $120 and $480, depending on whether we’re fixing a hinge, a track, a circuit board, or replacing an operator. You’ll get an exact price before any work starts, along with our 90-Day Done Right Promise in writing. Call (626) 628-9548 for a free estimate over the phone or in person.
In most cases, yes. We schedule repair calls throughout San Gabriel every day, and depending on what time you call and what’s actually wrong, we can often have someone out the same day. Emergency calls are answered around the clock by a live person. Call (626) 628-9548 and tell us what’s happening, and we’ll give you a straight answer on timing.
Yes. We repair and service gates installed by other companies, including operators from LiftMaster, FAAC, Mighty Mule, and BFT. We also offer a free second opinion on any written estimate you’ve received. If another company told you the gate has to be replaced and you’re not sure that’s true, call us. We’ll look at the actual gate and tell you honestly whether it can be repaired.
Usually, yes. A skilled weld on the hinge side, a reinforced post, or a patched bottom rail will often add years to a gate that another company would condemn. We weld on site in your San Gabriel driveway, so your gate never leaves your property. The cost to repair is almost always far less than full replacement, and you’ll know before we start whether welding will hold or replacement is the safer call.
Yes. We handle gate operators, keypads, intercoms, loop detectors, safety edges, photoelectric sensors, and power runs. If your gate needs to open for tenants, delivery trucks, or family members at different hours, we can set up the access system to match. All operator and wiring work is done to current safety standards, and on any gate with pinch points or automatic closing, we make sure the safety edges and sensors are working correctly before we leave.
Contact Gatewood Fence & Gate in San Gabriel
If your gate is stuck, sagging, screeching, or just plain refusing to cooperate, don’t get under it and don’t force it. Call Gatewood Fence & Gate at (626) 628-9548 and talk to a real person who has been fixing gates since 2001. We serve San Gabriel every day, we answer all day and all night, and we’ll give you a straight quote before any tool comes off the truck. Free estimates, upfront pricing, 90-Day Done Right Promise, and no trip charge inside the county. The name is on the shop, and the shop is down the road.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving San Gabriel and the San Gabriel Valley since 2001.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What San Gabriel Customers Say
"Welded the hinge back onto our wrought iron gate on site rather than taking it away for a fortnight. Ground it back and painted it and you cannot see the repair."
- Winston Achterberg"He builds the gates himself in his own shop. You can go and look at it. That is not something you can say about the outfits that just order a panel in."
- Doreen Whitfield"Safety photo eyes on our old gate had been bypassed by whoever serviced it last, which he was genuinely annoyed about on my behalf. Fitted proper sealed ones and wired them the way they should be."
- Otis Redmond