Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Gate Repair Services in Pasadena, CA
A gate in Pasadena isn’t just a gate. On Orange Grove Boulevard it’s a six-foot iron statement set between brick pillars. In Bungalow Heaven it’s a 1923 redwood picket with strap hinges somebody’s great-grandfather installed. On a narrow lot in the Arroyo Seco it’s the only thing between your dog and a canyon slope. We get that here, and we answer the phone at (626) 628-9548 when things stop working. Gatewood Fence & Gate is owner-operated and based close enough that we know Pasadena’s streets, its preservation rules, and which gate problems show up in August versus which show up in January.
Most Pasadena gate repairs start with a simple question: can this be fixed instead of replaced? Hal Gatewood has built the company on saying yes whenever the honest answer is yes. Welding on site, rebuilding hinge posts, straightening frames, replacing only the motor that failed instead of the whole operator. The name is on the shop, and the shop is down the road. That’s the oldest accountability there is.
For a fast, no-pressure estimate on any gate repair in Pasadena, call (626) 628-9548. A live person answers, 24 hours a day.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Key Takeaways
- Gate repair in Pasadena typically costs $85 to $450 depending on whether it’s a hinge, a post, a motor, or a full frame rebuild.
- Pasadena’s Craftsman and Spanish Revival housing stock means many gates are 70 to 100 years old, and standard prefab replacements often require Historic Preservation Commission review in landmark districts.
- Same-day and next-day repairs are available for most motor, hinge, and latch issues; full gate replacement or custom fabrication takes longer and includes a free measure and written quote.
- Calls are answered by a live person around the clock, and every repair carries the 90-Day Done Right Promise in writing.
Why Pasadena Homeowners Choose Gatewood Fence & Gate
Pasadena homeowners have a particular way of checking someone out. They’ll ask for the license number, look up the address, maybe drive by the shop. Hal likes that. Gatewood Fence & Gate is locally owned and owner-operated, with a published address, a verifiable license, and Hal Gatewood’s name on every invoice. No call center, no faceless national outfit with a rotating tech. When you call, the person who answers knows gates. When someone shows up, they’re background-checked and uniformed, and more often than not it’s Hal himself.
We work regularly in Bungalow Heaven and Madison Heights, which means we’ve repaired sagging Craftsman-era gates alongside flagstone paths and rehung iron driveway gates on estate lots where the footings were poured before television existed. Reviews from Pasadena customers consistently point to the same things: straight answers, fair pricing before any work starts, and a refusal to sell a new gate when an hour of welding gets the old one running true again.
Calls to (626) 628-9548 are answered by a live person, 24/7. Not a voicemail, not a chatbot. That matters at 7 a.m. when your gate won’t open and your car is stuck in the driveway.
Gate Repair Services We Offer in Pasadena
Gate Repair
A gate sags in the hinge post, not in the middle, so that’s where we start. We fix the post, re-seat the hinges, re-weld broken pickets, and rebuild warped frames in place. In Pasadena’s older districts, this often means working with original wood and iron rather than swapping it for whatever’s cheap at the home center.
See our full Gate Repair in Pasadena page for pricing details and common failure patterns.

Gate Installation
When a gate has truly reached the end, we measure in person, quote in writing, and build to fit the opening you have, not the opening a catalog assumes. New gates in Pasadena’s landmark districts need period-appropriate design, so we coordinate materials and styles that respect the house rather than fight it. The price you agree to is the price on the invoice, with no surprises at the door.
Explore what a full replacement involves on our Gate Installation in Pasadena page.

Gate Motor & Opener
If your gate starts opening halfway, beeps without moving, or reverses itself for no reason, the motor usually isn’t dead; something is out of adjustment or a safety sensor is failing. We service and repair nine major brands, including FAAC, BFT, Linear, and LiftMaster. Hal’s crew checks the whole system, not just the part that made the noise. Show me the gate closing on its own and I’ll show you where it’s failing.
Learn about swing-arm, slide, and underground operator work on our Gate Motor & Opener in Pasadena page.

Gate Access Control
From a simple keypad to intercom and telephone-entry systems, we handle wiring, programming, and retrofits. Pasadena’s mix of older estates and newer multi-tenant properties means no two access systems are alike, so we start with a site walk rather than a catalog page. Every install includes instruction on daily use, not just a box left on the gate post.

Gate Parts & Welding
Hal welds on site. That means the gate stays in your driveway, the repair matches the existing metal, and you don’t pay a haul-away fee for a gate that only needed two feet of new steel. We keep a full range of gate hinges, rollers, wheels, brackets, sensors, keys, and operator parts on the truck, and we fabricate what we can’t buy off a shelf.

Neighborhoods We Serve in Pasadena
We cover the whole city of Pasadena, from the hillside streets above Brookside Park to the flat bungalow grid near Hill Avenue. Typical response time for a repair call in the Pasadena area is same-day or next-day, depending on the job.
- Bungalow Heaven
- Madison Heights
- Linda Vista
- San Rafael Hills
- Oak Knoll
Why Pasadena’s Climate & Housing Affect Gate Repair
Pasadena sits hard against the San Gabriel Mountain front, and the Santa Ana winds that funnel down the canyons hit gates here harder than they do in flatland cities a few miles south. We regularly see wooden gate posts snapped clean at the base after a strong Santa Ana event, and steel frames racked out of square. The same wind that rattles the sycamores along Orange Grove will flex a wood gate until the rails split.
Temperature swings make it worse. Pasadena runs hotter than the coast in summer and cooler on winter nights, so wood expands and contracts on a cycle that eventually pops screws, warps panels, and loosens every bolted connection. On unshaded south-facing gates, the damage comes faster. When we rebuild a wooden gate in Pasadena, we account for that movement in how we cut and fasten the frame, because the fix that holds in Santa Monica fails in San Rafael Hills.
Then there’s the housing itself. Pasadena’s dominant stock is pre-WWII: Craftsman bungalows, Spanish Colonial Revival, Victorians. Those homes came with redwood pickets, cedar board-and-batten, and wrought iron set on footings poured in the 1920s and 30s. Eighty or ninety years later, the footings have shifted or spalled, original strap hinges are thin as a coin, and wooden latch hardware barely holds. That’s not a reason to replace the gate with aluminum. It’s a reason to repair the post, re-seat the hinges, and keep the gate that belongs with the house.
Bungalow Heaven and Pasadena’s Preservation Rules
Bungalow Heaven is the largest concentration of Craftsman bungalows in the United States, and it changes the math on gate work. If your house sits in a designated Pasadena landmark district, replacing a deteriorated original gate with an off-the-shelf prefab can trigger a design review with the Historic Preservation Commission. That process asks for period-appropriate joinery, hardware, and materials, not a vinyl panel from a box store. The same repair done a mile away in San Gabriel has no such requirement.
We’ve handled enough of these jobs to know when a Certificate of Appropriateness is likely to come into play and how to plan for it from the first measure. In many cases, the better route is repair: rebuild the existing gate using matching wood species and traditional hardware, which keeps the historic character intact and keeps the project out of a review queue. For homeowners who’d rather not navigate city paperwork on a gate, that repair-first approach often saves weeks.
Pricing for Gate Repair in Pasadena
Repair pricing in Pasadena runs on a case-by-case basis, but here’s what most jobs look like:
| Repair Type | Typical Range |
|---|---|
| Hinge replacement or adjustment | $85 - $200 |
| Wooden post reset or steel post re-weld | $150 - $375 |
| Gate frame straightening and re-welding | $200 - $450 |
| Motor or operator repair | $180 - $500 |
| Sensor, keypad, or safety edge replacement | $90 - $260 |
You’ll get a written price before any work begins, and the price you agree to is the price on the invoice. There’s no trip charge inside Los Angeles County, and every repair over $200 takes an automatic $40 discount right off the top. Seniors and veterans get 10% off permanently, no haggling required.
Call (626) 628-9548 for an exact quote on your gate. The estimate is free, and you’ll talk to a person, not a phone tree.
Service Area - Cities Near Pasadena
If you’re just outside Pasadena, we also serve San Marino, Altadena, San Gabriel, and Alhambra. Dispatch and scheduling are coordinated from our Los Angeles office, and crews work these streets every week.
Serving Pasadena, CA - Our Local Coverage Area
We’re based in the Pasadena area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Pasadena
Most gate repairs in Pasadena run between $85 and $450. A simple hinge fix might run $85 to $200, while a snapped post or a frame that needs re-welding typically falls between $200 and $450. If the motor is the problem, expect $180 to $500 depending on the brand and what failed. Call (626) 628-9548 and we’ll quote your specific gate before any work starts.
In most cases, yes. We keep same-day and next-day slots open for stuck gates, dead motors, and security issues. A live person answers the phone 24/7 at (626) 628-9548, and we’ll give you an honest arrival window, not a vague “sometime between now and Friday.”
It can. If your home is in a designated Pasadena landmark district like Bungalow Heaven, replacing an original gate may require a Certificate of Appropriateness from the Historic Preservation Commission. Repairing the existing gate, on the other hand, usually does not. We can tell you which path applies to your property during the initial visit, and we’ve handled enough of these to help you plan accordingly.
We weld and repair on site, which means your gate stays in your driveway. Hal carries welding equipment, steel stock, and a full set of spare parts on the truck, so most repair jobs never leave the property. You don’t pay a haul-away fee for a gate that only needed a new hinge post.
We’re certified to service nine major brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. If your operator isn’t on that list, call anyway; we’ve worked on plenty of off-brand units over the years and will give you a straight answer about whether it’s worth repairing.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Pasadena and surrounding communities since 2001.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Pasadena Customers Say
"Driveway gate had been dragging for two years and two other companies told me the whole thing needed replacing. Hal reset the posts, rehung it and it swings like it did when it went in. A fraction of the price of a new one."
- Hollis Amberly"Welded the hinge back onto our wrought iron gate on site rather than taking it away for a fortnight. Ground it back and painted it and you cannot see the repair."
- Winston Achterberg"He builds the gates himself in his own shop. You can go and look at it. That is not something you can say about the outfits that just order a panel in."
- Doreen Whitfield





Before
After
Before
After
Before
After