Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Azusa
A new driveway gate in Azusa typically runs $2,800 to $7,500 installed, with pedestrian gates falling between $1,200 and $3,200. We’re the crew that shows up on time, welds on site, and leaves you a gate built for the canyon winds that hit your neighborhood harder than the rest of the San Gabriel Valley. Hal Gatewood started Gatewood Fence & Gate in 2001, and our Gate Installation team has been putting gates into Azusa driveways ever since. Call (626) 628-9548 and you’ll get a live person, not a recording.
Why Gatewood Fence & Gate Is Azusa’s Preferred Gate Installation Company
Hal’s name is on the shop, and the shop is down the road. That’s the oldest accountability there is. When we install a gate in Azusa, we’re installing it for people we’ll see at the hardware store next week. Our crews know San Gabriel Canyon Road, the APU corridor, the tract homes off Azusa Avenue, and the older pockets east of Citrus. We don’t send a truck from three counties over and hope for the best.
Azusa homeowners tell us the same thing: they want a company that answers the phone and stands behind the work. We answer 24/7 with a live person. Every job carries the 90-Day Done Right Promise in writing: if it’s not done right, one call brings Hal back. No runaround, no fine print. We’re locally owned and owner-operated since 2001, with a published address and license number anyone can look up. Scheduling for Azusa is coordinated from our Los Angeles office, and crews serve the city daily.
We’re certified on nine major gate brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. That matters when your operator needs parts, not a lecture.
Our Gate Installation Services in Azusa
Sliding Gate
Sliding gates in Azusa face a problem most cities don’t: San Gabriel Canyon acts like a wind funnel. Sustained gusts rake the gate face sideways, and that lateral load works on the track, the rollers, and the motor gear with every wind event. We size slide gates for Azusa with heavier post footings and spec stainless roller hardware, because zinc-plated rollers fail early here. A typical sliding gate install in Azusa runs $3,500 to $8,000 depending on length, automation, and whether the track bed needs concrete work. We also factor in winter maintenance after mountain fires, because ash-laden debris flows pack slide tracks solid. If your gate sits in north Azusa near the canyon mouth, budget for a track cleanout every winter following a major burn.
Swing Gate
Swing gates are the most common driveway gate in Azusa’s 1950s and 1960s tract neighborhoods. The original wrought-iron panels are now 50 to 70 years old. The steel rusts, the welds crack, and the concrete piers under the hinge posts crumble from rain that comes hard after fire seasons. We install new swing gates with deeper post footings, through-bolted hinge brackets, and operators sized for the panel, not the smallest motor that might work. A single swing gate install in Azusa typically runs $2,800 to $5,500. Double gate configurations run $4,500 to $7,500, depending on the condition of the existing pillars and whether we need to pour new footings.
Security Gate
A security gate in Azusa with gate access control is about more than keeping a car out. Both APU and Citrus College generate foot traffic through surrounding residential streets, and gated complexes near the Gold Line corridor need solid access control so residents can get in without a headache. We install security gates with loop detectors, keypads, intercom systems, and operators from Linear, FAAC, and Viking. We also run a local track cleanout program for apartment complexes after fire seasons, because a packed slide track takes out a motor fast. Security gate installs in Azusa run $4,000 to $12,000 depending on gate size, access control components, and whether the job needs new bollards or barrier arms.
Pedestrian Gate
A side-yard pedestrian gate may be the hardest working gate on your property. It swings open dozens of times a day, in Azusa heat that bakes the hinges and in canyon winds that catch the panel when it’s open. We build pedestrian gates with heavier hinges and latch hardware than the big-box options, and we always through-bolt into the post or wall rather than relying on screws that will eventually strip out. Pedestrian gate installs in Azusa run $1,200 to $3,200, including the gate panel, hardware, and post work if the old post is rotted or racked.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Azusa
We stock parts in our own inventory for FAAC, BFT, Linear, and Viking operators, so a repair in Azusa doesn’t wait on a backorder from the distributor. Most of our Azusa gate installs pair a fabricated steel gate with one of these operators, chosen for how it handles heat and wind load, not just for the spec sheet. Need Gate Repair in Azusa? We stock the parts. Hal has been welding gates since 2001, and the person who shows up in your driveway is the same person who built the gate, not a subcontractor with a pickup and a brochure.
Common Gate Installation Problems We See in Azusa Homes
- Wind-racked hinge posts. The canyon wind funnel pushes gates sideways. Anchor bolts in older masonry pillars loosen, the hinge post shifts, and the gate starts scraping the driveway. If the existing post is crumbling, a new panel alone won’t fix it. We cut the post at the footing and pour a new pier.
- Ash-packed slide tracks. After the Bobcat Fire and the Station Fire before it, winter rains sent ash and sediment down into north Azusa streets. Slide gate tracks pack solid. Motors burn out trying to push through it. A track that isn’t cleaned after a burn will take out a new operator within a season.
- Heat-dead operator capacitors. Azusa summers over 100°F degrade gate motor capacitors faster than coastal cities. A capacitor that would last six years in Long Beach dies in three in Azusa. We spec operators with higher temperature ratings for Azusa installs and keep replacements stocked.
- Rust at the base of old wrought-iron gates. Original 1950s through 1970s gates fail first where the vertical pickets meet the bottom rail. Rain water sits in that seam, and post-fire rain cycles are more acidic. We weld in replacement sections or build a new panel, depending on how much of the original steel is still sound.
Pricing for Gate Installation in Azusa, CA
Here’s the straight answer. A standard single swing driveway gate in Azusa lands between $2,800 and $5,500. A sliding gate runs $3,500 to $8,000. A double swing gate runs $4,500 to $7,500. A pedestrian gate runs $1,200 to $3,200. Security gate packages with access control run $4,000 to $12,000. What moves the number is gate length, the condition of the existing posts and footings, whether we’re automating the gate, and what access control gear you want. You’ll get a written quote before any work starts, and that price doesn’t change at the door. Every estimate is free. Hal has standing offers too: $40 off any repair over $200, no trip charge inside the county, a free second opinion on any written estimate, and a permanent 10% discount for seniors and veterans.
We Also Serve Cities Near Azusa
We install and service gates throughout the San Gabriel Valley. Along with Azusa, our crews regularly work in Covina, West Covina, Arcadia, and El Monte, so if your property sits near the Azusa city line, we’re already running routes through your neighborhood each week. For more detail on our full service area, see Gate Installation in Azusa.
Serving Azusa, CA - Our Local Coverage Area
We’re based in the Azusa area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Azusa
The canyon wind applies steady lateral pressure on the gate face, which racks the frame, loosens anchor bolts, and stresses the hinge post. For any swing gate in north Azusa, we pour post footings with a wider diameter than standard, use through-bolted stainless hinge brackets, and avoid lightweight operators that can’t hold against sustained gusts. If you’re on a street near San Gabriel Canyon Road, this is the difference between a gate that lasts 20 years and one that sags in two. Call (626) 628-9548 for a free on-site look at your posts.
Because winter rains after a fire carry ash and sediment down from Angeles National Forest into north Azusa streets, and slide gate tracks become sediment traps. The material packs solid, the motor strains, and the bottom guides bend. We recommend a full track cleanout every winter following a major burn, and we’ll quote it as part of any new slide gate install so it doesn’t catch you off guard. Call (626) 628-9548 to schedule one before the rainy season.
Use galvanized steel for the frame and stainless steel for all hinges, brackets, and fasteners. Painted mild steel is cheaper up front, but canyon wind carries fine grit that removes paint fast, and post-fire rain is acidic enough to eat through steel at the weld seams within a few years. We fabricate gates in the driveway with galvanized steel frames and powder-coated panels, so the finish survives Azusa conditions rather than fighting them. Hal can quote it on site.
It usually needs new posts. A gate sags because the hinge post has moved, not because the panel is weak. If your post pier is original from the 1950s, it’s likely cracked or undersized for any new gate. We cut the old post at the footing, pour a new concrete pier, and through-bolt new stainless hinge posts before rehanging the panel or building a replacement. Just swapping the panel without fixing the post means you’ll fix it again in two years. Call (626) 628-9548 and Hal will give you an honest read on your existing posts.
Use a commercial-grade slide gate operator with a high-temperature-rated motor and a continuous-duty cycle, paired with a magnetic loop detector rather than a wand sensor. In Azusa heat over 100°F, capacitor-start motors on light-duty residential operators fail fast, and nylon rollers warp from the sustained temperature. We install FAAC and Linear operators for complexes in this corridor because they handle the heat and the daily cycle count. We also recommend an annual pre-summer service call. Call (626) 628-9548 for a complex assessment.
Call Gatewood Fence & Gate for Gate Installation in Azusa
If your old gate is sagging, if your slide track is packed with ash, or if you’re ready to put in a gate that actually holds up to San Gabriel Canyon wind, call us. Hal will answer or get back to you the same day. We do free estimates, we write the price down before work starts, and we stand behind every Azusa job with the 90-Day Done Right Promise. Call (626) 628-9548 or stop by and look Hal in the eye. The name is on the shop.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Azusa since 2001.