Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Arcadia
Gate repair in Arcadia usually costs between $185 and $480 for common fixes like hinge replacement, gate realignment, or operator troubleshooting, and most jobs are completed the same day we arrive. Heavier estate gates with dual-swing automation on 14 to 18-foot panels run higher, typically $600 to $1,800 when post footings, safety sensors, or control boards need full replacement. Hal Gatewood has been fixing the kinds of gates Arcadia actually has since 2001, and when you call (626) 628-9548, a live person answers. Not a queue, not a robot.
Arcadia is a different animal from the rest of the San Gabriel Valley. You have wide streets, big lots, and Arcadia Gate Motor & Opener systems that weigh more than some small cars. We know the difference between a mid-century ranch gate on its original hardware and a permitted estate entry that has to meet UL 325 entrapment protection. That distinction matters when we show up to your house.
Why Gatewood Fence & Gate Is Arcadia’s Preferred Gate Repair Company
Hal Gatewood’s name is on the shop and on every invoice. The shop is down the road, the address is published, and if you want to look him in the eye before you hire him, you can drive over and do exactly that. He has been owner-operated since 2001, which means the person who quotes your gate repair is the same person who stands behind it with the 90-Day Done Right Promise in writing. If it’s not done right, one call brings him back. No runaround, no fine print.
Arcadia homeowners have already been burned by national outfits that quote one price on the phone and hand you a different invoice at the door. We do not do that. The price is quoted and agreed before any work starts. Every job carries that promise. Reviews from Arcadia customers mention the same things over and over: the person who showed up was background-checked and in uniform, the price did not move, and the gate still works months later. We are not passing through Arcadia. We intend to be the name you give your neighbor on Santa Anita Avenue.
We answer calls around the clock. That does not mean you will reach a voicemail at 11 p.m. and get a callback tomorrow. It means Hal or his crew picks up. We also offer a free second opinion on any written estimate from another company, because if you are staring at a $3,000 replacement quote and your gate only needs a hinge post reset, you deserve to know that before you write a check.
Our Gate Repair Services in Arcadia
These four services cover the overwhelming majority of what we do in Arcadia. If your gate is doing something strange and you are not sure which category it falls into, call us and describe it. We will tell you honestly whether it is worth a service call.
Electric Gate Repair
Arcadia’s estate gates run on electric operators that sit in direct San Gabriel Valley sun for years at a time, and summer temperatures over 100°F cook wiring harnesses, loop detector leads, and control boards inside Gate Access Control - Arcadia boxes. When an electric gate stops responding to a keypad or remote, the problem is rarely the motor itself on the first call. It is usually a fried capacitor, a UV-cracked wire shorting to ground, or a control board that lost its programming. We troubleshoot on site and replace only what failed. On a street off Baldwin Avenue, we were called for a 16-foot dual-swing custom iron gate that shuddered and reversed mid-cycle. The FAAC 770 operator’s torque was maxed out because the hinge post on the street-side leaf had shifted under years of Santa Ana gusts, throwing the gate out of plumb. The operator was not the problem. The post was. We fixed the right thing.
Automatic Gate Repair
Automatic gate systems in Arcadia include the operator, safety photocells, keypads, remote receivers, and loop detectors under the driveway. When one piece fails, the whole system acts confused. You get gates that open halfway and reverse, gates that close on a car, or gates that ignore the keypad but trigger for the alley loop. We service nine major brands including FAAC, BFT, and Linear, and we carry common boards and sensors in the truck so a single visit usually finishes the job. Automation is where we see the most botched DIY work, particularly safety sensors that someone bypassed because the gate kept reversing.
Hinge & Post Repair
The hinge post is the spine of an Arcadia gate. A gate sags in the hinge post, not in the middle, and that is where we start. Older ranch homes built in the 1950s through 1970s often have undersized post footings by today’s standards, and attaching a heavier custom iron gate to a 4×4 post set in a shallow pour is a sag waiting to happen. We dig, re-set, and weld on site. We do not haul your gate to a shop and leave your driveway open for a week. The gate stays in your driveway while we fix it.
Gate Realignment
Santa Ana wind events are the single biggest alignment problem in Arcadia. Those seasonal gusts hit a 14 to 18-foot dual-swing gate like a sail, and every season of wind torques the gate slightly further off plumb until the operator is fighting geometry. A gate that drags on the striker post or won’t close the last two inches is an alignment problem, not a motor problem. We realign the leaves, adjust the hinges, and reset the operator limits so the gate swings clean. Fix the panel without the post and you’ll fix it twice. We fix it once, and the 90-Day Done Right Promise covers it if we missed something.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Arcadia
We are certified to service nine major gate brands, and on this page we will name three that show up constantly in Arcadia: FAAC, BFT, and Liftmaster in Arcadia. FAAC 770 and BFT Deimos operators are on a huge share of luxury estate gates here, and Viking legacy boards from the 1990s are still running on plenty of mid-century ranch gates. We stock local parts for Arcadia customers, which means a failed control board or photocell does not mean waiting a week for a national distributor. If it is on the truck, it goes in that day.
Common Gate Repair Problems We See in Arcadia Homes
- Santa Ana wind torque. Seasonal gusts through the Arcadia corridor twist heavy dual-swing estate gates off their hinge alignment. Each season compounds the drift until the operator overloads and reverses mid-cycle. We re-set posts and realign leaves so wind does not win.
- UV-cooked wiring and boards. Arcadia summers routinely pass 100°F, and operators bolted to sun-exposed columns bake. Wiring harnesses crack, rubber loop-detector leads degrade, and control board components fail. The gate still has power but won’t respond to anything.
- Safety sensors that were bypassed. We find this constantly on Arcadia estates: a previous informal repair disabled the photocells because the gate kept reversing. The gate works, but it is now a code violation under UL 325 entrapment-protection rules. A future permitted inspection fails until we restore proper sensors.
- Undersized post footings from the original ranch era. When a 1950s post was poured, nobody planned for a 600-pound custom iron gate. Post lean develops slowly, then the gate starts dragging, and the operator burns out trying to compensate. We dig deeper footings and re-set posts properly.
Pricing for Gate Repair in Arcadia, CA
A typical gate realignment in Arcadia runs $185 to $320. Hinge and post repair runs $250 to $550 depending on whether we are replacing hardware or re-setting a post footing with new concrete. Electric gate repair and operator troubleshooting runs $220 to $480 for board replacements, sensor restoration, or wiring repair. On larger estate gates with dual-swing automation, full post re-setting and safety restoration can reach $800 to $1,800, and that is still cheaper than a $6,000 gate replacement that some companies will push. The price is quoted and agreed before any work starts. No trip charge inside the county, and $40 off any repair over $200. Call (626) 628-9548 for an exact quote. Estimates are free.
We Also Serve Cities Near Arcadia
We work throughout the San Gabriel Valley, including nearby Sierra Madre, San Gabriel, El Monte, and San Marino. If you are in Arcadia or any of those neighboring communities, our Gate Repair team can help. For everything specific to this area, see Gate Repair in Arcadia.
Serving Arcadia, CA - Our Local Coverage Area
We’re based in the Arcadia area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Arcadia
Because a 14 to 18-foot dual-swing gate acts like a sail in Santa Ana gusts, and each season of wind torques the gate slightly further off plumb until the operator is fighting geometry. The fix is a hinge post re-set with a deeper embedment and then realignment of both leaves, not just tightening the hinge bolts. Call (626) 628-9548 and we will come look at what the wind has done.
Heat waves over 100°F cook operator wiring and control boards, and the most common failure we see is a UV-cracked harness shorting to ground or a control board that lost its force settings. The operator reads high resistance as an obstruction and reverses. We troubleshoot the board and harness on site, and if the board is obsolete or fried, we will tell you honestly whether to retrofit or replace. Call (626) 628-9548 for a service visit to your Arcadia home.
No. Arcadia gates installed under building permits must meet UL 325 entrapment-protection requirements, which means functioning safety photocells and proper force settings are mandatory. We frequently find informal repairs that bypassed the photocells, leaving the homeowner with a code-violating system that cannot pass a future inspection until we restore proper sensors. We handle that restoration as part of our Gate Repair service. Call us at (626) 628-9548 if you suspect your sensors were disabled.
Sometimes, but not always. A 1990s board from an operator no longer supported by the manufacturer can often be replaced with a universal retrofit board for $200 to $400, but if the operator’s motor and gearbox are also near the end, you are throwing good money after a $900 replacement. We will open the box and tell you the truth before we sell you anything. The free estimate applies to exactly that conversation.
Because the loop detector lead under your driveway has likely cracked from UV exposure and 100°F summer heat, or the detector itself has drifted out of calibration. A gate that opens for cars approaching from the alley but ignores your driveway loop is almost always a loop lead or detector problem, not an operator problem. We test the loop, replace cracked leads, and recalibrate the detector. Call (626) 628-9548 and we will sort it out.
Call Gatewood Fence & Gate for Gate Repair in Arcadia
If your gate sags, shudders, reverses, or just will not open, call (626) 628-9548. A live person answers around the clock. We will come to your Arcadia home, look at your gate, and give you the price before any work starts. Hal Gatewood has been fixing gates since 2001, and the name is on the shop. That is the oldest accountability there is.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Arcadia since 2001.