Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Highland Park
Gate parts and welding in Highland Park usually means one of two things: a hinge that finally let go on a 1920s iron gate, or a post that crumbled under the torque of a modern operator somebody bolted on during a flip. Most jobs we handle are repaired same day or next morning, and the work happens in your driveway, not at some shop across town. Hal Gatewood has been fixing gates since 2001, and we answer the phone around the clock. Call (626) 628-9548 and you’ll get a person, not a menu.
Highland Park’s hillside drives, shared walkways, and hundred-year-old ironwork don’t respond well to off-the-shelf fixes. A gate that drags on the uphill arc, a latch that won’t catch because the post settled, a rail that snapped at the weld – these are jobs we see weekly here, from the flats near Figueroa up to the ridgelines. Being local means we know the difference between a hinge issue and a grade issue before we even park the truck.
Why Gatewood Fence & Gate Is Highland Park’s Preferred Gate Parts & Welding Company
We’re not a franchise and we don’t dispatch from three states away. Hal Gatewood’s name is on the shop, his address is published, and he’s been at it since 2001. That’s the oldest accountability there is. When a Highland Park customer calls about a sagging gate on a 1930s brick post, the person who answers knows what that post looks like before you finish describing it.
Our crew has welded, re-hung, and re-posted gates all over Highland Park – up along Monterey Road, down in the bungalow flats near York Boulevard, and along the side streets feeding toward Figueroa. The reviews we’ve earned from Highland Park homeowners run the same theme: we showed up in the window we said, we fixed the gate where it stood, and we didn’t try to sell a replacement that wasn’t needed. Every job carries the 90-Day Done Right Promise in writing. If something isn’t right, one call brings Hal back. No runaround.
We’re licensed and we’ve been certified to service all the major gate operators: LiftMaster, FAAC, BFT, and Linear. But the paper doesn’t matter as much as this: we weld on site, we stand behind the work, and a live person answers 24/7. No voicemail maze, no chatbot, no “your call is important to us” recording.
Our Gate Parts & Welding Services in Highland Park
Hinge Replacement
Most Highland Park hinge failures start with a post that settled unevenly, not a hinge that wore out. We check the post footing and the rise-and-fall geometry before we cut the old weld. On sloped lots, we install rise-and-fall hinges so the leaf clears the uphill arc instead of binding on it. A hinge replacement in Highland Park typically runs $180 to $340, depending on the size of the leaf and whether we’re welding a new plate to the post or building up the old one. The price is quoted and agreed before any work starts.
Post Replacement
Brick pillars from the 1910s through 1930s were never built to hold the torque of a modern operator. On a hilly street feeding down toward Figueroa, our crew took over a job where a flipper had bolted a LiftMaster swing operator onto a century-old iron gate hung from a cracked 1920s brick hinge post. The gate bound every time it crossed the rise in the driveway. We demoed the failed post, poured a new footing with rebar tied into the hillside grade, custom-welded a new hinge post, and set rise-and-fall hinges so the leaf clears the slope – all without ever dropping vehicle access for the shared driveway. Post replacement in Highland Park typically runs $450 to $900, depending on footing depth and whether we’re working in brick, concrete, or hillside fill.
Rail Repair
A snapped top rail on a vintage iron gate is a welding job, not a parts swap. We cut out the broken section, sleeve and weld in new material, and grind it flush so the repair disappears under primer and paint. Rail repair in Highland Park runs $150 to $400 for a typical ornamental iron gate, more if the rail is decorative with scrollwork that has to be matched. We weld on site, so the gate never leaves your driveway.
Custom Welding
When off-the-shelf brackets, plates, and hinges don’t fit a 100-year-old gate, we make them. That’s the bulk of our Gate Parts & Welding work in Highland Park – fabricating a hinge post cap that matches the original’s profile, building up a striker plate that’s worn thin, or welding a reader post mount onto a gate that was never designed for automation. Custom welding runs $120 to $350 per hour including materials, and most fixtures take under two hours. We quote the job before the first arc is struck.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Highland Park
We’re certified to work on nine major gate brands, including LiftMaster, FAAC, BFT, and Linear. Highland Park’s renovation wave means we see a lot of mismatched pairings: a new FAAC operator bolted onto a 1920s iron gate hung from an unreinforced brick post. The operator isn’t usually the problem – the marriage is. We stock common hinge barrels, roller assemblies, latch hardware, and operator arms locally, so turnaround for Highland Park calls is usually same day or next morning. If a part has to come from FAAC or BFT, we tell you the real lead time before we start.
Common Gate Parts & Welding Problems We See in Highland Park Homes
- Rise-and-fall hinge failure on sloped drives. Many Highland Park streets feed down toward Figueroa at a pitch steep enough that a swing gate drags on its arc unless rise-and-fall hinges were installed. Flippers automating an old iron gate routinely skip this, and the gate binds on the uphill swing. We check hinge geometry before welding anything new.
- Cracked brick hinge posts from the 1910s to 1930s. Unreinforced brick pillars crumble under the added torque of a modern operator. The gate sags, and repeated “sag corrections” fail because nobody addressed the post. We rebuild the post footing, not just the hinge.
- Shared driveways on hillside lots. A slide gate conversion needs side clearance that shared hillside drives often don’t have. That forces custom welding on an existing leaf that was never designed for automation – re-engineering the hinge line, adding a wheel or roller where it’ll clear, and re-quaring the frame so it stops binding.
- Rust and desiccation from the Arroyo Seco thermal pocket. Highland Park’s fall Santa Ana winds dry out hinge lubrication and crack wood panels faster than coastal LA. Then the winter wet season drives rust into exposed iron hardware. We see the pattern in older hinges that feel gritty before they fail. Regular inspection catches this before a leaf drops.
Pricing for Gate Parts & Welding in Highland Park, CA
Here’s what Highland Park homeowners can expect to pay. Hinge replacement runs $180 to $340 per leaf. Post replacement runs $450 to $900 depending on footing depth and material. Rail repair runs $150 to $400. Custom welding runs $120 to $350 per hour including materials. A full gate gone to automation retrofit on a sloped lot – new post, rise-and-fall hinges, operator mount reinforcement – typically lands between $800 and $1,800.
What moves the price: hillside access, whether we’re working in brick or concrete, and whether the existing ironwork is sound enough to weld rather than replace. That’s an honest answer. The quote you get on the phone or at the estimate is the price you’ll see on the invoice. We put it in writing before any work starts, and every job carries the 90-Day Done Right Promise. Estimates are free, and there’s no trip charge inside the county. Call (626) 628-9548.
We Also Serve Cities Near Highland Park
Our crews cover Highland Park daily and also serve Highland Park neighbors in Arcadia, Pasadena, Sierra Madre, and El Monte. If you’re on the edge of the neighborhood or a few blocks over, give us a call and we’ll tell you straight when we can get there. Call (626) 628-9548 for a free estimate.
Serving Highland Park, CA - Our Local Coverage Area
We’re based in the Highland Park area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Highland Park
It’s almost never the hinge alone. Highland Park’s hillside drives slope enough that a swing gate’s leaf describes an uphill arc as it opens, and standard hinges won’t lift the leaf fast enough to clear the rise. The post footing has typically settled unevenly too. We check rise-and-fall hinge geometry and post plumb before welding anything, because fixing the panel without fixing the post means you’ll fix it twice. Call (626) 628-9548 and we’ll come look at it for free.
Yes. We work around the original ironwork whenever it’s sound, which it usually is. The post is what fails – unreinforced 1910s to 1930s brick crumbles under operator torque. We demo the failed post, pour a new footing with rebar, and build the hinge mounting back to match the original profile. The gate stays in your driveway the whole time. Call (626) 628-9548 for an estimate.
We stage the work. On a shared hillside drive, we weld in sections, prop the leaf safely, and flag the work so neighbors can pass. We never drop vehicle access for the whole shared right of way unless there’s no other way – and if that’s the case, we tell you before we start, not after. Call (626) 628-9548 and ask for Hal directly.
Yes. Any automatic gate in California needs entrapment protection – photo eyes, edge sensors, and proper force settings – to meet current safety standards. If a flipper automated your gate without this, it’s not just a malfunction risk, it’s a safety issue. We install and calibrate the protection on every operator we service. Call (626) 628-9548 and we’ll check yours for free.
Sometimes. A slide gate needs side clearance along the fence line, and many Highland Park hillside lots with shared drives just don’t have it. When clearance is too tight, we custom-weld the existing swing leaf to handle automation cleanly – rise-and-fall hinges, reinforced mounts, a roller where it’ll clear – instead of forcing a slide gate that doesn’t fit. Call (626) 628-9548 and we’ll tell you which way works on your lot.
Contact Gatewood Fence & Gate for Gate Parts & Welding in Highland Park
If your gate is sagging, dragging, or bound up on the uphill arc, call (626) 628-9548. You’ll get a live person, a straight answer about whether it’s a hinge, a post, or a grade issue, and a written price before any work starts. We serve Highland Park daily with free estimates, no trip charge inside the county, $40 off any repair over $200, and a permanent 10% discount for seniors and veterans. Hal Gatewood’s name is on the shop and on every invoice. The shop is down the road – that’s the simplest accountability there is.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Highland Park and surrounding communities since 2001.