Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterHow Much Does Gate Installation Cost in Arcadia?
A new gate installation in Arcadia typically ranges from $1,800 to $4,500, depending on the material, opener system, and specific site requirements like concrete work or electrical access. For a standard residential driveway gate, most of our clients in neighborhoods like the Highlands or near the Santa Anita Park area spend between $2,200 and $3,500, including the labor and materials for a secure, long-lasting setup.
Gate Installation Cost Breakdown (2026)
When we talk about the cost of installing a gate, we aren’t just talking about the metal or wood you see. We’re talking about the post-setting, the welding, the access control, and the electrical work that makes sure that gate actually works when you push the remote. Here is how the numbers generally break down for projects we handle in Arcadia.
| Service or Component | Estimated Cost Range |
|---|---|
| Basic Manual Swing Gate (Installation only) | $1,200 - $2,100 |
| Automatic Driveway Gate (System + Install) | $2,800 - $5,800 |
| Custom Iron or Steel Fabrication (On-site) | $2,500 - $6,500+ |
| Motor/Opener Replacement (Labor + Unit) | $900 - $1,900 |
| Safety Sensor & Loop Installation | $350 - $750 |
These numbers are estimates based on the local market here in Arcadia. If your existing posts are solid and the concrete pad is level, you’ll be on the lower end. If we have to tear out a crumbling footer, pour new concrete, or run new conduit from the house to the gate, that moves the price up. I’ve been doing this since 2001, and I’ve seen enough “bargain” installations that fail after six months because someone skipped the footer depth or used undersized hinges. We do it right the first time, or we don’t do it at all.
What Affects Gate Installation Pricing in Arcadia
Every driveway in Arcadia is different. You might be dealing with the slope of a hill near the Angeles National Forest or a tight space in a historic neighborhood where every inch counts. When I come out to give you a quote, I’m looking at these specific factors:
- The Gate Material: Wrought iron is standard for security and style, but it requires periodic maintenance. Aluminum is lighter and won’t rust, which is great for our humidity, but it doesn’t have the same structural rigidity as steel.
- Automation Requirements: A gate is only as good as its motor. We service nine major brands, including LiftMaster, FAAC, and Viking. If you need a high-cycle motor for a heavy gate, that’s a different price point than a standard residential opener.
- Site Accessibility and Terrain: If we have to work on a steep incline, we need specialized hardware to ensure the gate swings without dragging. A gate that drags on the pavement isn’t just an annoyance; it’s a security risk because it stresses the hinges until they snap.
- Electrical Infrastructure: Does your home have existing power at the driveway entrance? Trenching for new electrical lines or installing solar kits adds to the labor cost, but it’s cheaper than running a long extension cord that won’t pass code.
- Permitting and Codes: Arcadia has specific requirements for driveway access and safety sensors. We make sure every installation meets local safety standards because a gate that doesn’t reverse when it hits an obstruction is a liability nobody wants.
The Gatewood Difference: Why We Don’t Just “Swap and Ship”
Most national companies want to sell you a pre-fab gate out of a catalog, ship it from a warehouse, and bolt it onto whatever post is standing there. That’s not how we operate. I’m Hal Gatewood, and I’ve been running this shop since 2001. I’ve seen too many people pay for a “new” gate that starts sagging within two years because the installer didn’t address the hinge post.
A gate sags in the hinge post, not in the middle, and that is exactly where we start. If your posts are weak, we fix the posts. We offer on-site welding, which means we can repair or modify your gate right in your driveway rather than hauling it off to a shop. When we install a gate, we stand behind it with our 90-Day Done Right Promise. If it’s not done right, one call brings me back to make it right. No runaround, no excuses.
How to Save on Gate Installation
You don’t need to overspend to get a secure, functional gate. Here is how you can keep your project on budget without sacrificing quality:
- Repair Before You Replace: A lot of companies will tell you that a noisy motor or a dragging gate means you need a full replacement. Nine times out of ten, we can fix the existing hardware, hinges, or opener for a fraction of the cost.
- Leverage Our Standing Offers: We keep our overhead low so we can pass savings on to you. We offer $40 off any repair over $200, and we provide a permanent 10% discount for seniors and veterans.
- Get a Second Opinion: If you have a written estimate from another company that seems high, show it to us. We offer a free second opinion on any written estimate. If we can do it for less or better, we’ll tell you.
- Consolidate Work: If you need gate access control, sensors, and motor service, doing it all at once is more efficient than scheduling multiple trips. We don’t charge a trip fee inside the county, but grouping the work helps us streamline the labor.
If you are ready to get an honest price, call (626) 628-9548. A live person answers every call, 24 hours a day, 7 days a week. You won’t get a call center three states away; you’ll get someone who knows the streets of Arcadia.
FAQs - Gate Installation Cost
How much does it cost to repair a gate vs. replace it?
Repairing a gate typically costs between $200 and $800, depending on whether it’s a simple hinge adjustment, welding, or a motor component replacement. Replacing a gate starts at $1,800. We always suggest a repair-first approach if the structural integrity of the gate frame is sound, because fixing the panel without the post is just a temporary fix. Call (626) 628-9548 for a free estimate on your specific repair.
Can you install a gate on a sloped driveway in Arcadia?
Yes, we install gates on sloped driveways regularly. The cost is generally 15% to 20% higher than a flat-ground installation because we have to use specialized hinge systems and sometimes custom-welded hardware to ensure the gate clears the ground throughout its travel. Call us to discuss your specific slope; we’ll come out and take a look.
How long does a typical gate installation take?
A standard gate installation usually takes two to three days. The first day is for site preparation, post-setting, and concrete work, which needs time to cure. The second day is for mounting the gate, wiring the motor, and configuring the access controls. We don’t rush the concrete-if you rush the foundation, the gate will fail.
Do you offer financing for new gate installations?
We keep our pricing transparent and upfront, and we don’t use high-pressure sales tactics or complex financing schemes that bury costs in interest. We focus on providing a fair price for the labor and materials. If you are looking for a competitive quote for a high-quality, long-lasting gate, call (626) 628-9548 today.
What brands of gate openers do you service?
We are certified to service nine major brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. Because we know these systems inside and out, we can often repair them when other companies tell you they are obsolete. If you need a new motor, we can recommend the right model for your specific gate weight and usage frequency.
Pricing reflects the Arcadia market as of 2026. Gatewood Fence & Gate offers free estimates on Gate Installation services - call (626) 628-9548.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Arcadia since 2001.
What Our Customers Say
"Driveway gate had been dragging for two years and two other companies told me the whole thing needed replacing. Hal reset the posts, rehung it and it swings like it did when it went in. A fraction of the price of a new one."
- Hollis Amberly"Welded the hinge back onto our wrought iron gate on site rather than taking it away for a fortnight. Ground it back and painted it and you cannot see the repair."
- Winston Achterberg"He builds the gates himself in his own shop. You can go and look at it. That is not something you can say about the outfits that just order a panel in."
- Doreen Whitfield