Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Pico Rivera
When a gate fails in Pico Rivera, you need parts that hold and welds that last. That’s our whole job. We stock and install heavy-duty hinges, replacement posts, rails, rollers, latches, and locks for swing gates, slide gates, and the older wrought iron driveway gates that line so many streets off Whittier Boulevard and Paramount Boulevard. Hal Gatewood has been at this since 2001, and the name is on the shop, not a franchise. Call (626) 628-9548 and you’ll get a live person who knows Pico Rivera, not a recording.
Why Gatewood Fence & Gate Is Pico Rivera’s Preferred Gate Parts & Welding Company
We repair what other companies want to replace. That matters in Pico Rivera, where the housing stock runs heavy on wrought iron gates installed in the 1960s and 1970s, iron that’s worth saving with the right weld and hinge rather than scrapped for a stamped steel panel that won’t match the house. Our Gate Parts & Welding crew shows up with a welding rig in the truck, works in your driveway, and finishes the same day on most hinge, post, and rail jobs. Hal is the person who answers when you call, and if something isn’t done right, the 90-Day Done Right Promise brings him back. No routing numbers, no ticket queue, no runaround.
Pico Rivera homeowners have been calling us for years because we know the failure patterns here. The soil along the San Gabriel River floodplain shifts with the seasons, the Santa Anas bend panels in October and November, and the summer heat cooks circuit boards inside gate operators. A crew that only knows coastal gates won’t see these coming. We do.
Our Gate Parts & Welding Services in Pico Rivera
We carry and install parts on-site, and when the fix calls for steel and heat, we weld in your driveway. Here’s what Pico Rivera calls us for most.
Hinge Replacement
Hinges take the full weight of the gate every time it swings, and on older Pico Rivera properties the originals are often 40 to 50 years old, worn thin at the barrel, or pulling out of a rusted post. We cut off the old hardware, weld on new barrel hinges or heavy-duty strap hinges, and shim the leaf so the gate hangs level. A hinge job on a standard 12 to 14 foot driveway swing gate in Pico Rivera typically runs $180 to $320 per hinge assembly installed, depending on whether the post needs reinforcement.
Post Replacement
Posts set in Pico Rivera’s alluvial soil settle. The ground cycles wet and dry, and a post that was plumb in spring can lean an inch by October. We saw out the old post, pour a deeper footing with a heavier gauge steel post, and weld or bolt the gate back into alignment. Most residential post replacements run $350 to $700, and we quote that before we touch anything. If your gate sags, the problem is usually the hinge post, not the middle of the panel. We start there.
Rail Repair
Long slide gates on equestrian lots and ranch-style parcels near the river take real abuse. Rails bend when wind loads hit a solid infill panel broadside, and a bent rail binds the rack and pinion until the operator burns out trying to push it. We straighten or section in new rail steel, align the track, and check the wheels and guides. Rail straightening and refit in Pico Rivera generally runs $250 to $480 for a standard single-run gate, more on heavy 16-foot-plus trailer gates that need thicker stock.
Custom Welding
Sometimes the part doesn’t exist. A wrought iron gate off a 1962 tract home has a scroll detail that no parts catalog carries, or a ranch gate needs a bracket fabricated for a latch that cleared a horse trailer fender. We weld it custom on-site, match the profile, and paint or prime it so the repair doesn’t look like a patch. Custom welding runs $120 to $400 for most Pico Rivera repairs, quoted upfront and agreed before the first bead goes down.
Gate Rollers, Latches & Locks
We also replace gate rollers that fight the track after gravel and riverbed dust chew up the bearings, and we install or rebuild latch and lock sets that old iron gates eat through every few years, especially on alley-facing gates off Beverly Road and Mines Avenue where every opening and closing adds wear. Roller replacement typically runs $90 to $180 per gate; latch and lock work is $80 to $220 depending on the lock body and whether the keeper plate needs to be rebuilt.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Pico Rivera
If your automatic gate runs a FAAC, BFT, or Viking operator, we service it and stock the common parts locally so we’re not waiting a week on freight. We also work on LiftMaster and Linear units, and we’ve got the boards, limit switches, and safety eyes for most 2000-and-newer models on the truck. For Pico Rivera customers with horse-trailer gates off the river corridor, we keep heavier-duty rolling gate hardware in rotation so a failed operator doesn’t strand a trailer on the wrong side of a fence.
Common Gate Parts & Welding Problems We See in Pico Rivera Homes
- Santa Ana bent panels. Every October through December we get calls where a gust off the riverbed caught a solid panel gate broadside and bent the top rail or folded the sheet metal. Repairs usually mean straightening or replacing the rail and sometimes rebuilding the frame. If the wind grabbed it once, it’ll grab it again, so we discuss wind ratings when we’re in there.
- Posts settling in floodplain soil. The ground under much of Pico Rivera is San Gabriel River alluvium, layers of gravel and silt that shift as they dry out. A post that looked straight for three years starts leaning. We pull it, go deeper, and compact the footing in lifts so it stays put.
- Corroded welds on 30-to-50-year-old wrought iron. The original welds on 1960s and 1970s driveway gates fail from decades of moisture and temperature swings. You’ll see cracks starting at the scroll joints and hinge points. We grind out the old bead and run fresh, and we brace the panel so it doesn’t warp while we’re welding.
- Operators dying young in summer heat. Pico Rivera regularly sees 100°F-plus days, and that heat takes years off operator circuit boards and rubber seals. If your board fried in August, we can replace it, but we’ll also check whether the gate itself is binding and forcing the motor to work harder than it should.
Pricing for Gate Parts & Welding in Pico Rivera, CA
Here’s what we quote in the Pico Rivera market. Hinge replacement: $180 to $320 per assembly. Post replacement: $350 to $700 for most residential gates, higher for deep-set equestrian slide gates. Rail repair: $250 to $480. Custom welding: $120 to $400. Rollers: $90 to $180. Latches and locks: $80 to $220. What moves the number is the size of the gate, whether the post needs a new footing, and if we’re cutting out old corrosion rather than bolting to clean steel. Every price is written and agreed before we start. We don’t show up, do the work, and hand you a bigger invoice. The estimate is the price. And there’s no trip charge inside Los Angeles County. We also take $40 off any repair over $200, and if you have a written estimate from another shop, bring it and we’ll give you a free second opinion. Hal will tell you honestly whether their proposal is fair, too lean, or cost-padding.
We Also Serve Cities Near Pico Rivera
Our trucks run through the whole mid San Gabriel Valley, and we regularly take calls from Monterey Park, Rosemead, El Monte, and Alhambra. If you’re in one of those communities and your gate’s down, call the same number: (626) 628-9548. Dispatch and scheduling are coordinated from our Los Angeles office, but the person who shows up lives in your area and knows these streets.
Serving Pico Rivera, CA - Our Local Coverage Area
We’re based in the Pico Rivera area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Pico Rivera
Your post is sitting in San Gabriel River floodplain soil, which is layers of sand, gravel, and silt that compact unevenly as they cycle wet and dry. When a storm saturates the ground, the soil under a shallow footing loses bearing capacity, and the post drops. The permanent fix is to pull the post, dig a deeper footing below the active settlement zone, and set the post in compacted lifts of aggregate rather than loose backfill. On most Pico Rivera properties we go 30 to 36 inches deep for a standard 4×4 steel post, deeper for gate posts carrying a solid panel. If you’ve reset the post twice and it still leans, call (626) 628-9548 and we’ll look at what the ground is actually doing before we pour again.
Yes, in most cases. Sag in a wrought iron gate usually comes from a worn or stripped hinge, a post that has pulled out of plumb, or a frame joint that’s cracked at the weld. We cut out the failed section, weld in new steel or refit the hinge assembly, and the gate hangs level again. We’ve done this on hundreds of 1960s and 1970s gates across Pico Rivera, and the repaired section gets primed and painted so it doesn’t stand out as a patch. Replacement is the last option, not the first. For an exact quote on your gate, call (626) 628-9548 and describe what you’re seeing.
The safe procedure is to locate the manual release on the operator, usually a red lever or a T-handle that disengages the drive gear, then pull the gate open by hand using the gate’s frame, never by gripping the edge between bars where you can pinch fingers. Block the gate securely in the open or closed position so the wind can’t take it and slam it across the track. If you have a sliding gate with a chain drive, disengage the chain and check that the gate moves freely before pushing, because a heavy steel gate can pick up momentum in high wind faster than you can stop it. The release mechanism itself takes a fair amount of force on some models, and reaching inside an operator housing with the power still connected is dangerous. If you’re not sure which part is the release, call us before pulling anything. We’ll talk you through it or come out.
Yes, almost always. A gate that only has to clear a car can be built lighter than a gate that has to clear a 16-foot horse trailer and stand up to the wind that comes off the San Gabriel River bed. We specify a heavier gauge frame, usually 2-inch or 2.5-inch steel tube, a thicker infill panel, a deeper post footing, and a commercial-grade operator with a loop detector so the gate holds open when a trailer is on the detector and doesn’t close into your rig. Most Pico Rivera equestrian properties we work on get an operator rated for at least double the gate’s weight, and we weld the hinge and roller brackets rather than relying on through-bolts. The pricing runs higher than a standard residential slide gate, but a wind-folded panel or a burned-out operator costs more twice. Call (626) 628-9548 and Hal will come measure the opening and tell you exactly what the gate needs to do the job.
Because Pico Rivera sits inland and runs hotter in the summer, often 100°F or higher, and that heat bakes the plasticizers out of rubber seals and gaskets faster than it does in coastal-adjacent cities. The repeated thermal expansion also stresses the seal material every time the gate opens into direct afternoon sun. You’ll get roughly half the life from an operator seal here that you’d get in a cooler coastal town. We swap them during regular service calls before they crack enough to let dust from the riverbed into the gear train, and we can use a higher-temperature-rated seal compound if the operator runs in full sun. If your seals are crumbling now, call (626) 628-9548 for a same-visit replacement in most Pico Rivera neighborhoods.
Call Gatewood Fence & Gate for Gate Parts & Welding in Pico Rivera
If your gate is sagging, wind-bent, or making a noise it didn’t make last week, call (626) 628-9548. Hal or someone on his crew in Pico Rivera will answer, ask what’s happening, and tell you honestly whether it’s urgent. Estimates are free. The price is written before work starts. And every job is backed by the 90-Day Done Right Promise in writing. The name is on the shop, and the shop picks up the phone.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Pico Rivera since 2001.