Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Covina
Covinga homeowners with a sagging wrought iron gate or a broken hinge post need two things: a straight answer on the fix and a welder who will show up, not swap the whole gate. Gatewood Fence & Gate has been doing that since 2001. Hal Gatewood and his crew weld on site in Covina driveways, re-set shifted posts, and replace only the parts that actually failed. For gate parts and welding anywhere in Covina, call us at (626) 628-9548. A live person answers, day or night.
If you’re in North Covina off Barranca Avenue or over near the 10 freeway, we know exactly what your 1960s ranch gate is up against. The inland heat here is brutal on old iron. That’s the work we do, and we do it where the gate sits, not in a shop forty miles away.
Why Gatewood Fence & Gate Is Covina’s Preferred Gate Parts & Welding Company
We’re not a call center. We’re not a franchise. Hal’s name is on the shop, and the shop is down the road from Covina, staffed by people who answer the phone with a live voice every time you call. That’s the oldest accountability there is.
Covina is full of block-wall perimeter fencing and original wrought iron pedestrian and single-car driveway gates from the 1950s through the 1970s. We’ve welded hundreds of those exact gates. Our standing in this area didn’t come from advertising. It came from neighbors telling neighbors that the person who showed up did the repair in the driveway, stood behind it in writing, and didn’t try to sell them a gate they didn’t need.
Every job carries the 90-Day Done Right Promise, and it’s stamped on the invoice, not buried in fine print. Our Gate Parts & Welding crew works on site, with a background-checked, uniformed team. $40 off any repair over $200. No trip charge inside the county. A free second opinion on any written estimate. And a permanent 10% discount for seniors and veterans.
Our Gate Parts & Welding Services in Covina
Hinge Replacement
A gate doesn’t sag in the middle. It sags at the hinge post. When that post is sound, we cut the old hinge barrels off clean and weld on new heavy-duty hinges, grade-matched to the weight and swing of your Covina gate. We stock hinges in sizes that match the original wrought iron profiles from the tract home era, so the fix doesn’t look like an afterthought.
Post Replacement
This is the repair Covina needs more than any other. Fix the panel without the post and you’ll fix it twice. North Covina’s alluvial clay shrinks during dry summers and heaves after rain, slowly tilting steel post footings out of plumb. We cut the old post off at the footer, re-set a new one in a fresh concrete footing that extends below the disturbed clay layer, and weld the gate back square before we call it done.
Rail Repair
Rust eats the bottom rail first on wide driveway gates, especially on the north side facing the San Gabriels where water pools after rain events. If the rail is rusted through but the pickets and top rail are still sound, we cut out the bad section and weld in new steel, then grind and paint the seam. Most Covina gates on post-WWII ranch lots are worth repairing on site rather than hauling off.
Custom Welding
Some gates weren’t built to hold a modern operator. A Mighty Mule or LiftMaster swing arm needs mounting brackets with real purchase, which most 60-year-old gates don’t have. We weld custom mounting plates, operator brackets, and reinforcement gussets on the gate while it hangs in your driveway. We also custom-fabricate replacement sections when a gate design isn’t available off the shelf anymore.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Covina
We carry parts and are certified to service nine major gate brands, including LiftMaster, Mighty Mule, FAAC, and BFT. If your operator died and the gate still swings true, we replace the motor, the board, or the sensor, not the gate. If you have a Ghost Controls or DoorKing setup, same thing. We service what’s there and upgrade only when it makes sense. Parts for Covina customers are sourced locally where possible, which keeps turnaround short when your gate is stuck open.
Common Gate Parts & Welding Problems We See in Covina Homes
- Shifted hinge posts from alluvial clay shrink-swell. North Covina, especially hillside streets off Barranca Avenue, sits on clays that crack during 100°F summers. The footing moves, the arc goes out of plumb, and the gate binds or won’t latch.
- Weld fatigue at hinge post junctions. Covina’s inland position means daily thermal expansion and contraction with no coastal dampening. After 50 years of that cycling, the weld holding the hinge pin gives way without warning, and a Santa Ana gust finishes the job.
- Rack and pinion failures on wide foothill gates. The wider the gate span, the more stress on the drive gear. North Covina properties with larger lots tend toward slide gates, and when the gate is slightly out of level, the rack strips itself.
- Operator brackets torn from the post. When a gate slams during fall wind events and the operator tries to stop it, something has to give. Usually it’s the bracket bolts. We weld the bracket plate back to the post and reinforce the mount so it doesn’t happen again in the next Santa Ana season.
Pricing for Gate Parts & Welding in Covina, CA
A typical hinge replacement on a single-swing pedestrian gate in Covina runs $180 to $340, including cutting off the old hinges, welding new ones, and paint-sealing the welds. Post replacement runs $400 to $850 depending on post size, concrete removal, and whether the gate has to be re-hung the same day. Rail repair typically falls between $150 and $400 per section, and custom welding work is quoted at $95 per hour with a one-hour minimum. Every price is quoted and agreed before we start. No invoice surprises at the door, period.
| Covina Gate Repair | Typical Range |
|---|---|
| Hinge replacement (single swing gate) | $180 - $340 |
| Post replacement or re-setting | $400 - $850 |
| Rail repair (per section) | $150 - $400 |
| Custom welding (per hour) | $95 + materials |
If another company has quoted you a number, bring us the written estimate. We’ll give you a free second opinion. $40 off any repair over $200 means many Covina customers get the fix done the same day for less than they expected. Call (626) 628-9548 for a free estimate.
We Also Serve Cities Near Covina
Our crews handle gate parts and welding across the San Gabriel Valley every day. If you’re in Covina, we’re already local to you, and we also serve homeowners in Azusa, West Covina, Arcadia, and El Monte. Dispatch and scheduling for these areas are coordinated from our Los Angeles office, with crews serving Covina locally. Same promise, same pricing, same 90-Day Done Right Promise in writing.
Serving Covina, CA - Our Local Coverage Area
We’re based in the Covina area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Covina
In most cases, the post set in soil that has been expanding and contracting under Covina’s inland heat and dry-summer conditions. The original footing from the 1960s was poured shallow, and once the alluvial clay below it shrinks, the whole post tilts and drags the gate with it. Hinge replacement alone won’t hold because the post itself is moving. We re-set the post into a deeper footing below the disturbed clay layer, then weld fresh hinges to the corrected post. That’s the only fix that lasts here. Call (626) 628-9548 if your gate is binding and the post looks tilted; we’ll tell you straight what needs doing.
Usually, yes for North Covina hillside lots where running AC power to the gate would mean trenching hundreds of feet through rock and clay. Solar operators from LiftMaster or Mighty Mule are our standard recommendation for those long driveways, especially where the gate sits far from the house and a line run would cost more than the operator itself. We mount the panel, run the arm, and weld the operator bracket strong enough to hold through Santa Ana gusts. Call (626) 628-9548 and we’ll check your gate’s span and weight before recommending anything.
Almost always, we weld the new post to your existing gate. The wrought iron from Covina’s 1950s to 1970s tract homes is usually thick, forgeable, and worth saving. We cut the old post at the base, set a new steel post in fresh concrete, and weld the gate back onto new hinges while it hangs in place in your driveway. We only recommend replacement when rust has compromised more than half the pickets or the frame is twisted beyond straightening. Get a second opinion before you replace. Call (626) 628-9548 and we’ll come look.
The operator’s closing force is set too high, or the wind load is overloading the hinges, or both. Santa Ana winds funnel through the San Gabriel Valley with gusts that catch a wide gate like a sail and drive it through the arc faster than the operator can brake. We fix it by checking the operator’s force settings, installing or adjusting wind-resistant hinges if needed, and welding a physical stop so the gate can’t over-travel on the hinge side. Call (626) 628-9548 and we’ll check the operator and the hinges the same afternoon.
Every two years is enough for most Covina gates, and once a year if your gate faces west and bakes in afternoon heat all summer. We check for hairline cracks at the hinge welds, see if the post is tilting, and make sure the operator brackets are still torqued. A $150 inspection usually catches what would become a $700 emergency repair. Call (626) 628-9548 and we’ll schedule it when it suits you.
If your gate is sagging, slamming, or just refusing to close, call (626) 628-9548. Hal Gatewood will answer, or the person standing in the shop will, and we’ll get you on the schedule with a free estimate before any work begins. The name is on the shop, and the shop is down the road. That’s the whole arrangement.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Covina since 2001.